Ultra PFD Compact Manual Inflatable L150

Ultra’s Compact Inflatable Lifejacket uses the UML Pro-Sensor inflator which clearly indicates the armed state. This PFD has highly adjustable 38mm belts and a soft neoprene collar for comfort. The compact Inflatable has a minimum of 150 newtons  of floatation providing a high level of buoyancy (when needed), and is light and easy to wear all day. Suitable for use in a kayak or other boats (including off shore sail and power craft) as well as rock fishing. This PFD inflates once a tab is pulled so won’t accidently auto-inflate in the case of a casual swim. PVC protective cover over the CO2 cylinder and firing mechanism to enable easy visual check of the state of the inflation system. • Contoured slim fit design • Lanyard attachment point • SOLAS* grade reflective tape (Safety of Life at Sea) • 38mm plastic buckle and webbing • Manual and Auto models • Advanced Multi-Fit Design Manual inflatables require active inflation by the user and have servicing requirements, so please make sure to familiarise yourself with the operation of inflatable PFDs before use. Two Colours available Red and Navy Part # Navy UL-48843  UPC 9336130048843 Red  UL-48850  UPC 9336130048850 *  SOLAS is The International Convention for the Safety of Life at Sea an international maritime treaty that sets minimum safety standards in the construction, equipment and operation of merchant ships. These PFDs use inflatable chambers as a source of buoyancy. These types of PFDs require some maintenance and care to ensure correct operation. Your safety will be improved if you know how to care for your PFD. PRE-WEAR CHECK Visually inspect for damage. Check CO2 cylinder is full and screwed in hand tight. Ensure automatic cartridge (automatic inflation models only) is screwed in hand tight. Ensure once the operating is rearmed that the indication system is showing completely green in the indication window. Ensure pull cord is accessible when PFD is worn. Refer to instructions for RE-ARMING the PFD if the CO2 cylinder is empty or any indicators are red. CARE AND MAINTENANCE The life of this PFD will be prolonged if routine maintenance is carried out as follows: After every use: Wash in warm soapy water, rinse and dry thoroughly. Store in a dry ventilated position away from direct sunlight and harmful chemicals. Remove automatic cartridge (if fitted) before washing and re-fit when dry. Every six months: Inspect CO2 cylinder for corrosion or damage. Inspect bladder for signs of abrasion and wear. Inspect stitching, webbing and buckles for signs of excessive wear or abrasion Inflate bladder using the oral tube and leave overnight, inspect for any air loss or damage. If there are signs of corrosion, wear, damage or leaks as described above take to a professional service agent. Never try to repair your PFD yourself Annually: Carry out procedures in accordance with the PFD Self Service instructions that were supplied with your PFD. PFD Self Service Instructions are also available online from ultrapfd.com.au or scan the code below to download to your device.     Contact us or your local agent to arrange a professional service.